MT-002F
Speaker Driver
19
Max Power
1760 W
CS40.5
Upgrade - 4-inch Coaxial Speakers
Speaker Specifications
4-inch Midrange + Coaxial Tweeter
Voice Coil Diameter
25mm (Midrange) + 13mm (Tweeter)
Diaphragm Material
Carbon Fiber Diaphragm (Midrange) + PEI Diaphragm (Tweeter)
Magnet Assembly
Neodymium Magnet
Frequency Response
150 Hz ~ 25K Hz
Sensitivity
90 dB (2.83V/1m)
Nominal Impedanc
4 Ω
Recommended Power
25 ~ 50W
CT26.8
Upgrade - 1-inch
Speaker Specifications
1-inch
Voice Coil Diameter
25 mm
Diaphragm Material
AI Dome Diamond-Aura Finish
Magnet Assembly
Neodymium Magnet
Frequency Response
3.5K Hz ~ 23K Hz
Sensitivity
88 dB (2.83V/1m)
Nominal Impedanc
4 Ω
Recommended Power
10 ~ 30W
CW80.10
Upgrade -8-inch Front Subwoofer
Speaker Specifications
8-inch
Voice Coil Diameter
30 mm
Diaphragm Material
Polypropylene Polymer Diaphragm
Magnet Assembly
Ferrite Magnet
Frequency Response
50 Hz ~ 500 Hz
Sensitivity
90 dB (2.83V/1m)
Nominal Impedanc
4 Ω
Recommended Power
80 ~ 150W
CW85.5
Add-on - 8.5 inch Ported Box Subwoofer
Speaker Specifications
8.5 inch Ported Box Subwoofer
Voice Coil Diameter
38 mm
Diaphragm Material
High-rigidity fiber paper cone
Magnet Assembly
Ferrite Magnet
Frequency Response
30 Hz ~ 150 Hz
Sensitivity
90 dB (2.83V/1m)
Nominal Impedanc
2 Ω + 2 Ω
Recommended Power
100 ~ 300W
MX-12
Add-on -DSP Intelligent Amplifier(12-Channel)
Max Power
1760 W
Operating Voltage
8 ~ 18V DC
Frequency Response
20 Hz ~ 20K Hz
Signal-to-Noise Ratio
≥ 98 dB
Circuit Design
Class D
DSP Function
Built-in DSP
App Store
LQ AMP-X
Dimension (L × W × H)
251 × 154 × 50 mm
No installation guide available
Product Details

MAOT Audio Upgrades for Model Y Juniper

International Range | System Design and Product Guide

MAOT offers Enhanced and Flagship audio systems for selected Model Y Juniper vehicles with factory seven- or nine-speaker audio. This range is intended for markets outside mainland China.

Start with what you want to hear differently: more bass support, a stronger rear-seat listening experience, or a change in vocal and instrumental character. MAOT brings speakers, subwoofers, DSP amplification and vehicle-specific tuning together as a complete system.

Choose the upgrade that suits your listening

Enhanced keeps your factory speakers and adds bass and rear fill. Flagship also replaces the factory speakers, with tuning matched to the new configuration. Enhanced is a complete system in its own right; a speaker upgrade is available later if you want it.

Check your vehicle before ordering

Fitment includes confirmed-compatible seven-speaker variants such as Model Y Standard, plus supported nine-speaker variants. Trim names and audio specifications vary by market and model year. Have your local MAOT partner check the sales market, model year, trim and factory audio system. The vehicle name or speaker count alone does not establish compatibility.

The range

MT-002 | Model Y Enhanced

MT-002F | Model Y Flagship

MT-004 | Flagship Speaker Upgrade for this generation of Enhanced systems

The Model Y system uses one enclosed subwoofer. Each package has tuning matched to the vehicle and installed speaker configuration.


MT-002 Enhanced | Keep your factory speakers
Retain the factory seven or nine speakers and add one enclosed subwoofer, two rear-fill speakers and a DSP amplifier. Tuning is matched to the vehicle and its original audio configuration.

The subwoofer system adds low-frequency support, while the rear-fill speakers add output behind the listeners. Tuning also addresses the factory rear-door speakers, front-to-rear level balance and the way the speaker groups work together.
Choose Enhanced if you are broadly happy with the factory vocals and instruments and mainly want more bass support and improved rear-seat listening. There is no need to replace the remaining factory speakers later unless your preferences change.

MT-002F Flagship | Upgrade the factory speakers too
Flagship combines one enclosed subwoofer, two rear-fill speakers and a DSP amplifier with a nine-speaker replacement set: two separate tweeters, five coaxial speakers and two front-door woofers. It includes tuning for the Flagship configuration.


Factory nine-speaker vehicles use all nine replacement speakers. Factory seven-speaker vehicles use the five coaxial speakers and two front-door woofers. Their front-door sail panels have no separate tweeter mounting positions, so the two tweeters supplied in the kit are not installed.
In both factory configurations, the three dashboard midrange speakers and two rear-door midrange speakers are replaced by coaxial units with integrated tweeters. These add high-frequency reproduction at those locations to support vocal and instrumental detail for front and rear occupants.
The supplied speaker set is the same for both factory configurations. The number installed and the tuning used depend on the vehicle.

MT-004 | Upgrade from Enhanced to Flagship
Owners of a Model Y fitted with this generation of MT-002 Enhanced can add the MT-004 speaker upgrade once vehicle and hardware compatibility have been confirmed.

MT-004 contains two separate tweeters, five coaxial speakers and two front-door woofers. All nine are installed in compatible factory nine-speaker vehicles. Seven-speaker vehicles use seven of them; the two supplied separate tweeters are not installed.
Keep the one enclosed subwoofer, rear-fill speakers and DSP amplifier already fitted to your vehicle. The speaker upgrade includes updated tuning for the new configuration. Systems from earlier generations require a separate compatibility check.
Upgrading in stages involves another installation and tuning session. Ask your local MAOT partner for the complete labour and tuning cost before choosing this route.
 
Everyday control and installation
Wireless sound adjustment is available through a compatible iPhone app. Before purchase, confirm regional app availability, supported languages and iOS requirements with your local MAOT partner.
Compatibility with the original Tesla sound controls, and how those controls affect the added equipment, depends on the vehicle and installation. Have the installer demonstrate the available functions at handover.
Installation uses a dedicated connector harness, mounting hardware and a separate fuse. Agree equipment locations, space requirements and any trim work before installation. At handover, check wiring, secure mounting, output from each speaker and relevant vehicle functions such as alert sounds, then listen to the system before signing off.

Talk to your local MAOT partner
Provide the sales market, model year, trim and factory audio details for your Model Y, and explain what you would most like to change about the sound. Your local partner can confirm fitment, package contents, installation requirements, the full cost and local after-sales arrangements before you order.

MAOT AUDIO | Beyond Sound.

MT-002F
Immersive Sound with Stronger Envelopment MT-002F upgrades from 9 audio drivers to19 audio drivers to further reproduce OEM immersive sound
- The speaker layout shown in illustrations may vary for vehicles with special factory configurations or post-purchase optional retrofits. Please refer to the actual product for final confirmation.
- Please verify the compatibility of our speaker kit with your vehicle’s audio system prior to purchase or installation.
Contact Us
  • Official WeChat Account
    Official WeChat Account
    Scan the QR code to follow us for new product
    launches and the latest updates.
  • Official WeChat Mini Program
    Official WeChat Mini Program
    Scan the QR code for vehicle matching
    kit compatibility, and more.
  • Contact Details
    Contact Details
    Phone: +86 0752 2856606
    Email: Gary@icarav.com